Saturday, April 28, 2012

Just Takes 2 and a UFO

I'm making some progress on my Just Takes 2 blocks.  I have them all printed out, but reading on their website, it appears there may some issues with sizing on the foundation blocks.  I thought I noticed that last night when I was looking at one of the blocks and trying to figure out how to rotary-cut it instead.

Because I'm doing these blocks during my "stress-relief" time, so far I've been focusing on the easiest ones that can be assembled using pre-cut strips and rotary cutting techniques.  So far, this is what I've accomplished this week.


There is one thing I'm not crazy about the instructions - it's hard to figure out the finished size of some of the smaller HST and QST pieces so I can adapt them to rotary cutting using the Easy Angle and Companion Angle.  For the most part, they are there but buried in the instructions.




I'm not a big fan of the "Cut it Big and Whack it Off" club.  The best thing I've ever done for my piecing skills was participating in Bonnie Hunter's mystery quilt-along this past year.  I have gained so much confidence using the right tools and speed-piecing techniques. 

Here's my finished Pinwheel block -

(The block is straight - it's just the camera angle.) On the top, you can see my UFO leaders and enders.  I've even manage to start assembling a few blocks for that quilt as well.





Here's how I'm working with the Just Takes 2 blocks so far.  First, I cut a WOF strip from each colour (Kona Ruby and Bella White) in each of the following sizes:
1.5", 2", 2.5", 3", 3.5", 4", 4.5"

I had actually started out making little kits for each block, but quickly realized that I was using alot of the same size strips.  If I need an odd-size, such as 3 3/4", I just trim up a piece of a 4" strip.  There aren't many odd sizes, so I'm not worried about waste.

I'm also making a spreadsheet to track which blocks I've done, the name of the block and the inspiration quilt from the Infinite Variety show.  I plan on buying the catalog when it comes out and it will be great to have my references organized. Did you know you can download an app for your iPhone to view the show?

So far, I have bought 3 yards of the white (from fabric.com) and 2 metres of the red (from Hamels, my local quilt shop).  I didn't want to order the red online as I am very picky about what shade of red I like.  I prefer blue-reds, not orange-reds, and Ruby fit the bill!

All organized in my project box, all ready for the next blocks - which I'm off to do a couple more!







2 comments:

  1. Hi Terri

    Like what you have done so far, and was also fired up after Orca Bay to do this mystery. I have made a few of the blocks, and not happy with some of them, and yesterday I had a closer look at the paper based flying geese, to discover that the vertical seems to be short (the horizontal is OK).

    ReplyDelete
  2. Hi, Karen: I haven't tackled the flying geese yet but that seems to be one of the problem blocks on the Just Takes 2 forum. Perhaps you can adjust yours without taking them apart - the unfinished measurements should be:

    Blocks 13 & 24 - 3.5" x 12.5"
    Blocks 20 & 22 - 3.5" x 12.5"

    If I get time to tackle them today, I'll let you know how I fared! I'm going to try one of the foundation-pieced ones, but I also have a new flying gesse tool I'll try to compare.

    Terri in BC

    ReplyDelete

Thank you for your comments! If you ask a question, I will reply here!